My car employs an adaptive cruise control system that operates RADAR. Does this have implications for the functioning of my Stinger?
It is possible. More and more car manufacturers build radar technology into their vehicles, for such systems as adaptive cruise control and blind spot alerters. Products that use the same radar frequencies can theoretically cause mutual interference. Likewise, it is possible your car’s radar systems influence your Stinger. This is, however, not a certainty, for different car brands and makes often use different frequencies. Therefore, please check pro-actively with your auto dealer or Stinger installer to get exact radar frequency info. For detailed advice, you can also contact Stinger.
My car employs an adaptive cruise control system that operates LASER. Does this have implications for the functioning of my Stinger?
No. The laser used in in-car laser products does not interfere with Stinger laser functionalities. It could, however, interfere with police laser and even cause ‘jammed codes’ on the police laser gun. This ‘jammed code’ is not caused by your Stinger, but rather by the laser technology built into your vehicle by your car manufacturer.
Is it possible to trace the use of the Stinger HD+ Radar Antenna with the help of a Radar Detector Detector (RDD)?
No, this is virtually impossible. The Stinger HD+ Radar Antenna is a (phased array) 'patch antenna', which is a closed system and therefore fully stealth. By the way, in countries or regions where radar detectors are not allowed, from a legal point of view, it is not relevant that the Stinger cannot be detected by an RDD. This, as technically a Stinger is not a radar detector. The Stinger’s stealth characteristics are convenient however, as Stinger users will not be unnecessarily pulled over by the police asking them whether they are using a radar detector.
Is it possible to enable Radar Alerting, Laser Alerting, and LaserShield on a Stinger that currently has those functionalities disabled?
Yes, that is possible. Go to the Stinger Desktop on your Mac or PC, download the relevant Stinger Operating Software, and install it onto your Stinger by sticking your Stinger USB stick into the USB-lead in your car.
Note that usage of these above applications is meant for countries/regions where they are allowed. You are personally responsible for ascertaining the legality of using these applications in your jurisdiction. Specifically for Stinger users who enter a country/region/sate where these functionalities are not allowed, every Stinger display comprises a possibility to erase these functionalities at the push of a button. This allows for a quick and convenient way to abide by diverse local rules and regulations.
On a Stinger with Radar Alerting/Laser Alerting software, is it possible to erase or deactivate the Radar Alerting/Laser Alerting software?
Yes, erasing is possible. No, deactivating is not possible.
In order to make it possible to also use your Stinger in countries or states where Radar or Laser Alerting is not allowed, you must be able to erase these functionalities. This is possible on every Stinger. Once you have erased the software, it is really gone - not merely deactivated. It’s permanent. So to use Radar Alerting or Laser Alerting or LaserShield again, you cannot simply re-activate those functions. You will have to go back to your Mac or PC, download the applicable software, and re-install it on your Stinger.
On a Stinger with LaserShield software, is it possible to erase or deactivate the LaserShield software?
Yes, both erasing and deactivating are possible.
In most countries or states where you are not allowed to employ a laser jammer, you are allowed to drive around with it - you are just not allowed to actively and knowingly use it to hamper a police laser speedtrap. For this reason, on every Stinger, it is possible to activate and deactivate your LaserShield. But it is also possible to erase the software. Once you have erased the software, it is really gone - not merely deactivated. It’s permanent. So to use LaserShield again, you cannot simply re-activate those functions. You will have to go back to your Mac or PC, download the applicable software, and re-install it on your Stinger.
Do all Stinger systems need to be installed?
Yes, all Stingers need to be installed. Both the Fiber Lasers and the HD+ Radar Antenna need expert installation, as does your display of choice.
Do I need a professional installer to do my Stinger install or can I do it myself?
It is our extensive experience that 95% of our customers would do wisely to have their Stinger installed professionally. Installing your Stinger system involves not only knowing your way around the car mechanics and electronics, but also requires real experience with, and a true feel for, the art of custom car installation. Click here if you would like to find a Stinger installer near you.
How much does a Stinger cost?
How much does installation of a Stinger System cost?
This depends on what you choose to have in your Stinger system, your personal preferences for the installation and your installer. To can in touch with a Stinger installer please go here.
How do I keep my Stinger up-to-date?
First and foremost, make sure you download (for free) the Stinger desktop application. You have not already done so, you can do so here.
If have Stinger Desktop installed, simply connect your Stinger USB-stick with your Mac or PC. Your Stinger Desktop will automatically download any available software updates. Next, attach your USB-stick to the USB-lead in your car. Upon starting your car engine, your display will ask you to allow starting the download. 'OK' this and do not switch off the car during the download.
7931 East Pecos Rd.
Mesa, Arizona 85212
(480) 372 2929
Mobile Solutions of Canada
2331 50 Ave. SE
Calgary, Alberta T2B0N1
(403) 698 3695
© 2020 Carcomputer USA, Inc.